Insect Remover was created by our cooperation with professional developers. It is a very effective yet safe preparation for removing insects from any surface. Its concentrated formula allows to remove unwanted dirt in no time. The product achieves its top efficiency just after 30 seconds. Remember, you are holding the result of many hours of professionals’ work, who take your work seriously and want to make it exceptionally effective.

How to use

Directions for use: product ready to use. Spray on a cleaned surface using an atomizer. Leave the preparation for about 30 seconds, then rinse with high pressure. Do not allow it to dry on the bodywork. It is not recommended to use the product on hot surfaces.  

Tar & Glue Remover  is a ready-to-use tar and glue remover. It is distinguished by its extremely rapid reaction with dirt. Our product is based on fatty alcohols, which makes it safe for any painted, aluminium or plastic surface. Remember, you are holding the result of many hours of professionals’ work, who take your work seriously and want to make it exceptionally effective.

How to use

Directions for use: product ready to use. It achieves maximum efficiency when applied to dry surfaces. Apply the preparation with an atomizer to the contaminated surface. Wait a few minutes, then rinse thoroughly with water. Check in a non-visible place before application. Apply to the dry surface. It is not recommended for use on hot surfaces.

Engine Cleaner Liquid was created by our cooperation with professional developers. It is a highly concentrated preparation for removal of a greasy dirt. Particularly recommended for cleaning of the engine compartment. It can also be used to clean the chassis and the body when properly diluted.

How to use

Directions for use: concentrated product. Adjust the dilution depending on the degree of soiling. Spray the solution with an atomizer on the cleaned surface. Wait a few moments and rinse the product with high pressure. When cleaning the engine compartment it is advisable to first remove the dirt with a paintbrush, brush or a sponge. Do not allow the product to dry. We do not recommend using Engine Cleaner Liquid for hot surfaces. Dilution: engine compartment from 1: 1 to 1: 5, bodywork from 1:20 to 1:30. 

Clay Lube lubricates your paintwork to allow clay bar to slide across your vehicle surface lifting any contaminants with ease.

How to use

1. Ensure vehicle has been washed thoroughly.
 2. Apply Clay Lube liberally to a small area at a time.
 3. Break off a small amount of Clay and mould into a useable size.
 4. Glide your clay across the paintwork in backward and forward motions making  sure to keep the area well dosed with lube.
 5. Repeat as necessary until your clay no longer picks up any contamination,  fold the clay in on its self, and then move to a new section at a time repeating  the above steps. 

Long-formulated formula eliminated ammonia and aggressive chemicals. Perfectly removes tobacco residues, road dirt, fingerprints, insects, etc. In addition, the best components allow you to take care of the aluminum and chrome elements. Concentration of the product allows it to dilute even 1: 5. This has a direct impact on performance. Glass Cleaner does not leave streaks.

How to use

-Apply on cleaned surface,
 - wipe with microfiber,
 - polish with dry microfiber.

The product is a solution for enthusiasts who value a clean car and their time. Just a few minutes a day and our favorite will always be delighted with its appearance. The special formula of the product ensures excellent slipperiness and gloss. Greatly emphasizes the depth of lacquer and protects previously applied waxes or coatings. In addition, QD has properties that repel water nicely.
 From today your car will always be awe-inspiring!

How to use

- shake before use,
 - apply the product with atomizer,
 - Spread the delicate microfiber,
 - polish,
 - After a while, wipe it again with a clean, dry microfiber

Quick Wax was created by our cooperation with professional detailers. It is an ideal solution for those who do not want to spend long hours of waxing their car’s body. It contains natural wax – carnauba - made from the leaves of a Brazilian plant: copra. That results in a long protection of your car’s paint. It is characterized by easy application, quick hardening and pleasant, apricot scent. Our product boosts colour and gives it more depth. Such an effect can also be referred to as "wet paint". The hydrophobic effect that is achieved after the application of the preparation results in a perfect repellence of water and dirt. The effect stays for up a few weeks or a few thousand kilometres. Durability of an effect depends on a method of application and on atmospheric conditions.

How to use

Directions for use: product ready to use. Shake before use. Spray the product on a clean surface using an atomizer. Use a soft microfiber to apply the product evenly on a dry surface – such a way of application guarantees the longevity. You can also apply the product on a wet surface and then rinse under high pressure to accelerate the application.    

The use of polymers has allowed for excellent properties such as coating durability, ease of application and performance. In addition, the product provides a matte finish that is highly sought after by professionals and hobbyists involved in professional car care. After applying the dressing materials are pleasant to the touch and the application gives a wonderful perfume smell.

How to use

- shake before use,
 - pour on the microfiber applicator 2-3 times,
 - distribute the product on protected items,
 - wipe with a clean and dry microfiber.

Tire and Rubber Cleaner was created by our cooperation with professional developers. It is a product dedicated to cleaning tires and rubber components. Its unique ingredients prevent the rubber from drying out. Our product effectively copes with the most demanding dirt or remains of dressings. The cleaned surface remains perfectly degreased and ready for dressing’ s application. Remember, you are holding the result of many hours of professionals’ work, who take your work seriously and want to make it exceptionally effective.

How to use

Directions for use: product ready to use. Apply product using an atomizer. Wait about 1 minute and rinse under high pressure. The product can be diluted 1: 5 if dirt is not very stubborn. 

This high quality product will make your tyres look like new again. Tyre Dressing is easy to apply and long-lasting. This product will make your tyres stay black for weeks even during bad weather.

How to use

1. Apply this product to the sidewall of a clean tyre using tyre dressing applicator or sponge.

2. Can also be applied to wet or dry tyre sidewall surfaces.

3. Thoroughly coat the tyre.